|
|
|
|
Miscellaneous Parts Page Axle Flange Spacer Toyota 8 & 10 Bolt $ 5.25 Ea 32-400 1/8" Thick Aluminum 1 oz
90 Deg Bellcrank $ 27.00 Ea 23-300 4 oz
C'Bored for Bearing $ 11.00 Ea 32-500
3/8" Thick Aluminum
In-Line Fuel Filters VISU-FILTER 704C 1/4" ID
Hose
$2.00 Ea 862C High-Flow 5/16" Hose $3.00 Ea
Allows Starter to be disengaged when not in use Prevents starter damage in the event of spinout and reverse overreving of the starter occurs Fits 1100 early Oil cooled and 750 cc using 1100 starter and idle gear. Part # 24-100 $59.00
Starter mounting tabs must be modified Detailed drawing of machine work is included or we can machine it for you. Machining cost $30.00 on your starter Part # 24-200 $38.00
GSXR 1100 Water Cooled (93-98) Starter mounting tabs must be modified Detailed drawing of machine work is included or we can machine it for you. Machining cost $30.00 on your starter Part # 24-300 $38.00
Round Wheel
Spacers 6"
OD 3"
ID Aluminum
4", 4 1/4" and 4 1/2" Bolt Circles For 4 Lug Wheels 55-300 1/4" Thick $ 9.50 Ea 7 oz 55-400 1/2" Thick $ 12.50 Ea 14 oz Round Wheel Spacers 6" OD 3 1/2" ID Aluminum 4 1/2", 4 3/4", and 5" Bolt Circles For 5 Lug Wheels 56-300
1/4" thick $
9.50 Ea 6.2 oz 56-400 1/2" thick $12.50 Ea 12.4 oz
90-110
Battery Disconnect
Switch $16.50
Good for 500 Amps Two 3/8" Lugs Handle can be removed in the off position for Safety and Security
25-100 Spring Rod with 1/2" Rod Ends $125.00
4 Spring rates available : 400#, 600#, 900#, and 1200# spring rate is adjustable plus or minus 150# Up to 3/4" total travel To order call and give spring rate and center to center length
|
|
|
